Low V.O.C., Good for Rust, Better for the Environment
Do you like the smell of paint? Some people live for it, others not so much.
The smell of a new coat of paint is distinct, but what’s it doing to your lungs? Or the environment? Overall, the majority of paints release high levels of volatile organic compounds that can contribute to a range of health problems, pretty much all over your respiratory system.
Some of the most harmful chemicals found in paint are ‘volatile organic compounds’ or VOCs. They can be unstable, contain carbon, and are easily vaporize into the air. These elements react with other elements to produce ozone (air pollution, breathing problems, headache, watery eyes, nausea, etc.)
Once the paint is applied and begins to dry, the VOCs are released into the air at high levels. Even worse? Indoor VOC levels are routinely 10x higher than outdoor levels, and up to 1,000x higher immediately after painting.
Well, after reading all of this, we like many other Americans, began to demand safer alternatives. And rather than just waiting for someone to create these, we created our very own. Rust Bullet paint has some of the lowest paint VOCs on the market today.
A certain degree of risk is involved in the use, or more properly, the misuse, of most industrial materials; Rust Bullet is no exception to this rule. Ensure adequate ventilation and fresh air when working with Rust Bullet coatings.
Rust Bullet products and coatings permanently stops rust and corrosion. Instead of creating a film over the rust application area, Rust Bullet penetrates the pores of the area causing the affected rust areas to dry out.
With Rust Bullet Coating you can protect a wide variety of products such as metals, wood, and fiberglass.
When Rust Bullet is applied to rusted metal it penetrates the substrate, dehydrates the rust, until reaching the metal. This allows the resin to become intertwined with the rust, then becomes part of the coating and solidifies into an armor tough coating with phenomenal adhesion.
RUST BULLET IS A MOISTURE CURED URETHANE
Moisture-cured means using the natural elements of the atmosphere for curing. This means no artificial heat source is required, no additional activator or component required, and performs in:
Atmospheric – Thermal Stability, UV Resistance, Water‐Proof, FlexibilityImmersion – Water Proof, Chemical ResistanceUnderground – Water Proof, Impact Resistance
The Most Important?
RUST BULLET IS A 70%+ SOLIDS PRODUCT
The high solids in Rust Bullet Coatings mean a low content of solvents, which evaporate during curing, therefore more than 70% of the product applied to the surface will remain on the surface. This is a more environmentally friendly and safer to use the product, with decreased levels of flammability and health risk, as well as some of the lowest VOCs on the market today for its intended purpose, make Rust Bullet Coatings the preferred coatings for all things rust.
See our List of Satisfied Customers:
RUST BULLET SATISFIED CUSTOMERS CONTINUING TO USE RUST BULLET PRODUCTS TODAY:
Federal Aviation Administration, (FAA)United States Department of Transportation, (DOT)United States ArmyUnited States Navy (USN)United States Air Force (USAF) ‐ Spacelift Range Systems Contract (SLRSC)United States Marine Corps (USMC)United States Naval Undersea Warfare Centers (NUWC)United States Coast Guard (USCG)The National Radio Astronomy Observatory’s Very Large Array (VLA)(One of the world’s premier astronomical radio observatories)