Rust Bullet for Concrete

Rust Bullet for Concrete

Rust Bullet for Concrete is a special formulation that improves the appearance of concrete. It provides an impervious shield allowing easy clean-up of oil, grease and chemical spills along with strong protection against impacts, abrasives, and atmospheric elements. Use for all your concrete flooring needs including garage floors, walkways, paths and much more. Can be applied directly onto concrete surfaces without acid etching. It has outstanding adhesion to concrete surfaces and is scratch, chip, chemical and UV resistant, requiring no primer, basecoat, or topcoat. It’s ideal for indoor or outdoor surfaces and protects from hot tire pick up. For decorative purposes, apply Rust Bullet Decorative Flakes atop the final wet coat of Rust Bullet for Concrete then topcoat with DuraGrade Clear to seal the flakes.

We want you to experience optimum performance and enjoy the protective benefits of our coatings, so please follow our simple Application Guidelines prior to starting your project to set yourself up for success! Moisture-cured urethane coatings begin curing when exposed to air. Do not open the can until ready to use. All Rust Bullet coatings require a minimum of two coats. The surface to be coated must be completely dry, have a profile for adhesion, and the recoat time of approximately 2-6 hours must be followed. As soon as the previous coat is dry to the touch, you are ready for the next coat.

Approximate Coverage: 300-400 ft² per gallon, per coat