Rust Bullet Industrial and Rust Bullet Automotive are super-tough, high-performance, industrial grade coatings that can be applied on new, clean metal or directly over surface rust, providing permanent corrosion protection with phenomenal adhesion. Rust Bullet has been awarded an unprecedented two U.S. patents by the United States Patent and Trademark Office.
Rust Bullet Automotive is for automotive applications whereas Industrial is for commercial, industrial, home and farm, and marine applications. These coatings contain an aluminum flake which provides unmatched protection in salt heavy environments such as saltwater, coastal cities, areas with heavy road salts during winter months, and more. This aluminum flake also provides a sacrificial element which corrodes preferentially and protects the metal surface underneath.
DuraGrade Color is our new Low VOC rust inhibitor for metal applications. The resins in the coating are different – they are stronger than our original coatings. Because the resins are stronger, aluminum flake is not needed, and unlike Rust Bullet Automotive, we can pigment this product. This provides a colored finish and only one type of coating is needed to complete a project.
Apply two coats of DuraGrade Color to the metal surface and that is it.
Use DuraGrade Color as a topcoat to either Automotive or Industrial, providing the best of both worlds. The combined protection creates the strongest armor tough coatings available. No matter the choice, Rust Bullet coatings are meant to stop rust and prevent it from returning to the surface to which it is applied.
Rust Bullet for Concrete is an industrial strength protective moisture-cured urethane coating specially formulated for concrete. It contains aluminum flakes that create a super strong barrier to keep moisture, oxygen, and other contaminants from reaching the surface. These overlapping aluminum flakes add longevity, strength, and durability.
This special formulation improves the appearance of concrete, and provides an impervious shield allowing easy clean-up of oil, grease, and chemical spills. Finally, it provides strong protection against impacts, abrasives, and atmospheric elements. Use for all concrete flooring needs including garage floors, walkways, paths and much more.
If a different color other than metallic gray is desired, topcoat with a second coating such as DuraGrade Color.
DuraGrade Concrete does not contain this aluminum flake; however, this new Low VOC resin is stronger than our original formulation. This new resin gives DuraGrade Concrete longevity, strength, and durability. AS DuraGrade Concrete comes in 18 colors, only one product is needed to protect your floor.
DuraGrade Concrete is a bit thicker than Rust Bullet for Concrete, however it is still applied in thin even coats.
DuraGrade Clear is a high-performance, ultra-low VOC, rust inhibitive and protective coating. It’s scratch, chip, chemical and UV resistant and is ideal for indoor or outdoor surfaces. Use this to seal Rust Bullet decorative flakes.
With just 49 g/l of VOCs, DuraGrade Clear’s patent pending formula is an environmentally preferred ultra-low VOC coating compliant in every state and air quality management district.
DuraGrade Clear can be used as a stand-alone coating or as a topcoat and can be applied directly onto clean or rusted metal, concrete, wood and other surfaces. DuraGrade Clear has superior adhesion and provides excellent corrosion protection and abrasion resistance.
DuraGrade Clear is easy to apply by brush, roller, or spray equipment. Dries to a water clear finish.
BlackShell, WhiteShell, and Clear Shot are formulated specifically as topcoats for Rust Bullet Industrial, Automotive and Concrete formulations. In addition, they can be used as a stand-alone coating and provide exceptional corrosion protection. We must mention that they create a stronger and more durable protective shield when applied as a topcoat. All these products give a beautiful gloss finish and are scratch, chip, and UV resistant. They also offer unbeatable chemical resistance.
Rapid Fire Accelerator is designed for spray applications of Rust Bullet coatings. Rapid Fire decreases the drying time needed between coats, ultimately reducing project completion time up to 80% while maintaining optimal coating performance.
ProPlus is our bargain version of Rust Bullet Automotive. It’s a slightly thinner formula than Rust Bullet Automotive and provides superior coverage for rust protection. If you’re looking for rust prevention on a budget, consider Pro Plus.
ProPlus patent-pending formula is low in VOCs providing VOC compliance in all 50 states. ProPlus has outstanding adhesion to concrete surfaces and is scratch, chip, chemical and UV resistant, requiring no primer, basecoat, or topcoat
Metal Blast is a metal surface cleaner and conditioner that’s like three products in one – it dissolves rust, degreases the surface and it etches metal. Metal Blast eliminates the high cost of surface preparation by properly etching surfaces with minimal or poor adhesive qualities and providing an ideal anchor pattern for a superior coating bond. It works on any metal surface including aluminum, stainless steel, and shiny polished metal.
Metal Jacket is a non-greasy, non-dirt collecting, non-tacky, dust retardant, continuous, flexible, removable film that will not crack, peel, or flake. Metal Jacket protects all metals against atmospheric rust and corrosion, salt spray, high humidity, chemical fumes, abrasive matter, fingerprinting and fingerprint corrosion. This translucent coating allows for easy reading of identification markings stamped on parts.
Rust Bullet Solvent is for cleanup, equipment prep, and the thinning of Rust Bullet coatings. Effectively clean equipment such as paint pots, lines, guns, brushes, and rollers, as well as spills, drips and overspray. Use to thoroughly flush and clean spray equipment before, after and between coats to avoid possible damage to spray equipment. Do not thin unless directed by Rust Bullet Technical Support. The approximate thinning ratio is 3% to 5% by volume (i.e. 1 to 1.5 oz. solvent per quart of coating).
Bloxygen blocks oxygen and protects, and preserves opened Rust Bullet coatings during storage. Bloxygen uses ultra-pure Argon, an inert gas, to drive the oxygen out of partially used containers of Rust Bullet coatings and will preserve the coating for up to six months. A short spray into the container will protect the Rust Bullet from reacting with the oxygen or moisture present in our normal atmosphere.