Is your vehicle starting to show signs of rust? This issue is almost unavoidable as most cars are primarily made of steel and iron. But it doesn’t mean you can’t do anything about the problem. A special rust converter for cars will make your beloved ride look as good as new, preventing further rusting.
Rust converter for cars– How to apply your new rust converter like a pro
- Prepare the surface
This first step is the most crucial but is also easily overlooked. If you fail to prepare your car’s surface for a new layer of rust converter, the result will only lead to disappointment.
So, make sure you remove excess rust from your vehicle using a stiff (wire) brush. Be thorough yet gentle, removing loose flakes without damaging the car’s surface.
Then, don’t forget to clean and degrease the surface (Metal Blast). You should let it dry and then wipe it down before moving on to the next step, preventing contaminants from reacting with the rust converter.
- Apply the product
Rust converters are best applied with a brush or roller, depending on the amount of surface you wish to cover. After application, it will only take about 20 minutes for the substance to dry. The converter will still need to cure for another 24 hours.
You need to apply the required second layer of coating for better rust conversion after the first layer has dried to the touch.
- Add your finishing touches.
Finally, use a simple mixture of soap and water to clean your equipment. If you intend to add a top coating, avoid using latex paint and use oil-based paint instead.
In addition, avoid pouring the used rust converter back into its original can. An unlined metal paint can should be used.
Searching for top-quality rust converters for cars? It’s best to buy your industrial and automotive coating from an experienced supplier using the latest technology for their products.