What is Rust Bullet’s product line?

Rust Bullet Standard and Automotive are Super-Tough, High-Performance, Industrial Grade Coatings that can be applied on new, clean metal or directly over surface rust, providing permanent corrosion protection with phenomenal adhesion. Rust Bullet has been awarded an Unprecedented Two U.S. Patents by the United States Patent and Trademark Office. Rust Bullet Automotive is to be used for Automotive applications whereas the Standard is for Commercial, Industrial, Home and Farm, and Marine Applications.

Rust Bullet for Concrete is an industrial strength protective polyurethane coating specially formulated for concrete. This special formulation not only improves the appearance of concrete, it provides an impervious shield allowing easy clean-up of oil, grease and chemical spills along with strong protection against impacts, abrasives, and atmospheric elements. Use for all your concrete flooring needs including garage floors, walkways, paths and much more.

Clear Coat for Concrete is an industrial strength, clear, anti-skid coating formulated as a top coat for the Rust Bullet for Concrete Coating. This special formulation is used to create a beautiful, safe, anti-skid, glossy finish. Can also be used to seal in decorative chips or flakes.

BlackShell, WhiteShell, ColorShell, and Clear Shot are formulated specifically as top coats for the Rust Bullet Standard, Automotive and Concrete Formulations. They all cure to a beautiful gloss finish and are scratch and chip resistant, and UV resistant. They also offer unbeatable chemical resistance. The ColorShell’s are ANSI Z535 Compliant OSHA Safety Colors. ColorShell’s are available in Red, Orange, Yellow, Green, Blue and Purple.

Rapid Fire Accelerator is designed for spray applications of Standard, Automotive, and Rust Bullet Top coats. Rapid Fire decreases the drying time needed between coats, ultimately reducing project completion times up to 80% while maintaining optimal coating performance.

Metal Blast is a metal surface cleaner and conditioner that is like having three products in one. It dissolves rust, degreases and it etches metal. Metal Blast eliminates the high cost of extensive surface preparations by properly etching surfaces with minimal or poor adhesive qualities providing an ideal anchor pattern for a superior coating bond. It works on any metal surface including aluminum, stainless steel and shiny polished metal resulting in optimum coating performance.

Bloxygen blocks Oxygen, protects and preserves opened Rust Bullet Coatings during storage. Bloxygen uses ultra-pure Argon, an inert gas, to drive the oxygen out of partially used containers of Rust Bullet Coatings and preserve the coating for up to six months. A short spray into the container will protect the Rust Bullet from reacting with the oxygen or moisture present in our normal atmosphere.

Solvent is for cleanup, equipment prep, and the thinning of Rust Bullet Coatings. Effectively clean equipment such as paint pots, lines, guns, brushes and rollers, as well as spills, drips and over spray from coatings applications. Use to thoroughly flush and clean spray equipment before, after and between coats to avoid possible damage to spray equipment. Do not thin unless directed by Rust Bullet Technical Support. The approximate thinning ratio is 3% to 5% by volume (i.e. 1 to 1.5 oz. solvent per quart of coating).

Metal Jacket is a non-greasy, non-dirt collecting, non-tacky, dust retardant, continuous, flexible, removable film that will not crack, peel, or flake. Metal Jacket protects all metals against atmospheric rust and corrosion, salt spray, high humidity, chemical fumes, abrasive matter, fingerprinting and fingerprint corrosion. Translucent coating allows for easy reading of identification markings stamped on parts.