What are the application methods for Rust Bullet Automotive?

All Rust Bullet coatings may be applied by brush, roller or spray equipment. A brush coat should be applied evenly without buildup in a crosshatch method (up and down and side to side) using continuous motion. Thin even coats using the crosshatch application method will produce the best results. Always keep a wet edge on the tip of your paint brush. The appropriate number of coats should be applied to achieve the recommended dft for your project. Brush and roller applications result in an approximate dft of 1.5 – 2.5 mils per coat. An HVLP spray system applies approximately 2-3 mils per coat, while the Airless sprayer application averages a minimum of 3 to 4 mils per coat.