|
Comparison of Rust Bullet®, |
|
| •
Cost (price of product) • Application (labor and preparation costs) • Cost of Maintenance • Environmental costs to meet EPA and other Federal/State requirements • Cost of Management |
|
Rust Bullet® has provided a Product Comparison chart including Rust Bullet®, Wasser® Brand System, and POR-15® System, the three top competitors of the scientific research tests. This chart shows how Rust Bullet® prevails over the market leaders in rust/corrosion control. It is clear that Rust Bullet®, the superior product, will generate a significant savings for anyone concerned with and/or responsible for controlling rust and corrosion. |
|
|
Product Comparison
of Rust Bullet® and the Top Two Competitors in the Scientific Research Tests |
|
Product
|
Application
Step* |
Minimum
Recommended DFT (Dry Film Thickness) per coat |
Sq Feet covered
with 1 Gallon @ Recommended DFT per coat |
Cost per Gallon
|
Cost to Cover
400 sq ft with Recommended System Thickness per coat |
|
Rust Bullet®
|
|
|
|
|
|
| Rust Bullet® |
1
|
3 Mils
|
400
|
$156.99
|
$14.99
|
| Rust Bullet® (2nd coat) |
3 Mils
|
400
|
$14.99
|
$14.99
|
|
| Rust Bullet® requires NO TOPCOAT unless a specific color is desired | |||||
|
Total (NO
ADDITIONAL PREPARATION COSTS) - (LOW
MAINTENANCE COSTS)
|
$209.98
|
||||
|
|
|||||
|
WASSER®
|
|
(Avg. used for calculation) |
|
|
|
| MC Miozinc |
1
|
3-4 Mils (3.5)
|
284.0
|
$58.00
|
$81.69
|
| MC Ferrox B |
2
|
3-5 Mils (4.0)
|
248.5
|
$46.00
|
$74.04
|
| MC Luster (Topcoat) |
3
|
2-3 Mils (2.5)
|
365.6
|
$71.00
|
$77.68
|
|
Total
(Not Including Extensive Preparation
Costs**) - (High
Maintenance Costs)
|
$233.41
|
||||
|
|
|||||
|
POR15®
|
|
|
|
|
|
| Marine Clean TM |
1
|
|
350
|
$19.00
|
$19.00
|
| Metal Ready TM |
2
|
|
350
|
$28.75
|
$28.75
|
| POR15® Paint |
3
|
2 Mils
|
350
|
$105.00
|
$120.00
|
| POR15® Paint (2nd coat) |
2 Mils
|
350
|
$105.00
|
$120.00
|
|
| Chassis Coat/Black Cote |
4
|
2 Mils
|
350
|
$140.00
|
$160.00
|
|
Total
- (HIGH MAINTENANCE COSTS)
|
$447.75
|
||||
|
* Application
Step means a surface preparation, or the application of a required
component.
|
|
**
Add EXTENSIVE PREPARATION COSTS
to total cost of product depending on a variety of techniques, such
as: SAND BLASTING AND COLLECTING,
NEEDLING, HEAVY SCRAPING,
AND CHEMICAL TREATING. In addition to the high cost of preparation, the containment and disposal of the waste created by these extensive preparation procedures in order to comply with EPA (Environmental Protection Agency) requirements, could be far greater than the initial cost of the product. |
|
NONE
OF THESE EXTENSIVE PREPARATION PROCEDURES ARE NEEDED
FOR RUST BULLET®, SO THESE SUBSTANTIAL COSTS DO NOT APPLY. |
|
Rust Bullet® - The superior rust/corrosion control product. POR-15 is a registered trademark of RestoMotive
Laboratories/POR-15, Inc. |
