Automotive
Undercoating by Rust Bullet
Automobiles are beautiful but with time and as your
car is exposed to the atrocities of nature like blazing
heat, rain, UV rays etc., wear and tear occurs,. All
cars require proper maintenance if you want your car
to have a long life. Rust is also a ‘major’
maintenance problem. Car Rust Paint and Automobile undercoating
are solutions to car rust problems.
Generally, the lower body of an automobile is more
prone to rusting then the upper body and therefore requires
special treatment like automotive undercoating. The
requirement becomes a necessity if you have invested
in a vintage automobile as your investment is at stake.
But for this very important need, there are very few
options of automobile undercoating available in the
market. ‘Rust Bullet’ provides a very effective
solution to this automobile undercoating problem for
protection from rust.
Rust Bullet- Kills the rust!
Rust Bullet, is a one step Urethane based patented product
that penetrates rust and dehydrates it and seals the
area with an armor tuff tough coating. Rust Bullet Automotive
can be used as an automotive paint as well as an automotive
undercoating. The paint is metallic grey in color and
it takes approximately 3 Quarts to do an under carriage
with two coats. Rust Bullet automotive is different
than the Rust Bullet industrial formula; it is thinner
and has more metal so as to give a smoother paintable
finish to your car.
Advantages of using Rust Bullet Automotive
- It requires very little prior surface preparation
- It can be applied directly to the rusty metal
surface
- It has superior adhesion properties
- It is very easy to apply and maintain
- It is UV resistant
Application of Rust Bullet Automotive
Rust Bullet Automotive can be applied to your car with
the help of an HVLP spray system with a 1.3 to 1.5 tip
at 40 PSI, at about 2 Mils per coat. For a 10 year warranty
a dry film thickness of 6 mils is required. After applying
three coats 24-48 hrs later you can apply a top coat
with a color of your choice. It is advisable to run
Xylene or acetone through the lines of your equipment
before & after spraying the first coat of Rust Bullet,
to avoid any damage to the equipment.
Rust Bullet solves the rust problem with its easy and
simple process. Visit the site www.rustbullet.com and
try this unique product.
---
| 
