 |
|
ARTICLE
ABOUT RUST BULLET®
IN STREET RODDER MAGAZINE
|
|
|
 |
According to veteran bodyman,
painter, and hot rodder Carl Brunson, Rust Bullet is the best thing
he’s ever seen for use over, and prevention of, rust.
Rust Bullet is a two-application product that penetrates the porous
rust and reaches the metal underneath, producing chemical activity.
Basically, the rust becomes intertwined in the resin matrix of Rust
Bullet and remains a permanent part of the coating. The second coat
of Rust Bullet fills any pinholes in the first coat and forms a
nearly impenetrable coating that protects the metal.
Silver gray in color, Carl points out that while topcoats aren’t
required, conventional paint can be applied over the second coat
for appearance. Rust Bullet offers excellent abrasion resistance
and is quite difficult to scratch (which makes it excellent for
suspension components). If a scratch or chip in the coating does
occur, the metal will rust in the breached area, but rust will not
proceed beyond the breach. Rust Bullet will not lift, blister, or
peel away from its leading edge in any significant degree. Simply
reapplying Rust Bullet over the scratch or chip reseals the coating,
proving easy, low-cost maintenance. |
Source: Street Rodder Magazine, April 2004 Volume
33, No. 4
|
|
 |
