|
Rust Bullet® Metal Blast Rust Dissolver, Surface Cleaner and Conditioner Rust Bullet Metal Blast is a cleaner and conditioner for metal that removes rust, grease, and contaminates allowing a superior bond to surfaces that have minimal or poor adhesive qualities. Metal Blast removes surface rust and properly etches metal for better paint adhesion. Metal Blast enhances the adhesive properties of coatings on any metal surface including aluminum and shiny polished metal. Metal Blast creates an ideal anchor pattern to surfaces allowing superior adhesion of all Rust Bullet Coatings. Metal Blast dissolves rust from metal tools and equipment as well as other rusted surfaces adding years of performance to any paint project. Metal Blast’s simple process lightly etches metal, thus eliminating the high cost of extensive surface preparations. Apply Metal Blast to bare metal. Spray, flow-brush, dip or wipe Metal Blast on the surface to be cleaned. Allow Metal Blast to remain on the surface long enough to loosen the rust and etch the metal, approximately two to 20 minutes depending on the degree of rusting. Small parts may be immersed until clean. While the surface is wet with Metal Blast, wipe with a clean cloth in a smooth, even direction. Lightly scuff problem areas with an abrasive scrub pad making certain the surface is smooth and clean.
For heavily rusted areas, soak the surface for 20 minutes to three hours by using a cotton cloth or folded paper towel saturated with Metal Blast. Buff the area with an abrasive pad and rewet with Metal Blast. Buff the area again when all the rust is removed. The surface cleaned with Metal Blast should be rinsed with water, preferably hot; or just wiped with a clean rag and permitted to dry thoroughly prior to the application of any Rust Bullet coating or desired paint.
Benefits of Rust Bullet Metal Blast  Easy to use - wipe on, wipe off Dissolves rust Cleans and conditions metal surfaces Properly etches and conditions metal for better paint adhesion Discourages the formation of rust under coatings and paints Cleans and prepares metal for painting Prevents the formation of flash rust Eliminates future peeling of paint Prepares metal for welding and soldering Available in 24 ounce, 1 gallon, 5 gallon, and 55 gallon containers Made in the USA
Wear appropriate protective clothing to prevent skin contact. Wear appropriate eye protection to prevent eye contact. For additional safety information see the product MSDS.
|
