One Stop Shopping

Rust Bullet® may be applied by brush, roller, or spray.  Application equipment must be clean and free of moisture or any and all other paint, especially latex, or paints containing alcohol.  The surface to be coated must be dry, and large flakes of rust should be scraped or wire brushed off.

It is critical that at least two coats of Rust Bullet® be applied, (dry film thickness of 3 mils each). It is particularly important that the first coat be generous enough to soak through the rust to the steel or iron underneath. A second coat of Rust Bullet® must be applied to completely seal the first coat; this cannot be done with any other paint or coating material... >>>MORE (Click Here for the Complete Application Guidelines...)